Faster Drying + Tougher Surface Sealer Additive
Sealcoating.com’s Doble Mat™ 2x is a sealing additive for both Refined Tar sealers or Asphalt Emulsion that speeds drying time AND improves surface toughness and aggregate suspension. This blended copolymer emulsion modifies the sealer into a stronger and longer lasting coating. This sealcoating additive does doble duty by reducing surface scuffing of power steering marks with less drying time. Opening the lot early can mean power steering marks and tracking, but this formula when prepared properly, will not track and cures up to 80% faster. This is a 5 gallon container
- For Refined Tar and Asphalt Emulsions
- Tougher Surface + Faster Dry Time
- Cures Seal up to 80% faster
- Helps Suspend Sand Evenly
- Performance Enhancing
- Dries to a deeper black color
SURFACE PREPARATION: Surface must be clean, dry and free of all dirt, dust and debris. Oil or petroleum contaminants should be treated using Sealcoating.com’s Seal Over + (GGPP602PR) prior to seal coating with high performance seal mix designs containing Doble Mat 2X.
APPLICATION: Mix sealcoating material well prior to using. Use ½ to 3 gallons of Doble Mat 2X sealer additive undiluted to modify or enhance 100 gallons of sealer. The amount will vary based upon mix design and the type of traffic use for your seal coating mix design. As a guideline, 1 to 2 gallons of Doble Mat 2X to modify 100 gallons of sealer is sufficient for standard applications. Always pour sealer into mix tank, add recommended water content and agitate prior to the slow introduction of Doble Mat 2X. Then mix to a uniform consistency prior to the addition of aggregates (finely screened and washed sand with consistent sieve size or substitute black angular aggregate of similar size).
RECOMMENDED MIX DESIGN FORMULATION:
|Sealer (RP 355E) Gallons||Water Gallons||Sand Pounds||Black Elixir™ Sealing Additive Gallons|
|100||20-35||300-500||0.5 to 3|
CAUTION: KEEP FROM FREEZING. Do not use when rain is forecast, when surface is wet or when temperature is below 55°F. Wash tools in water. Use a paint thinner if material has dried. Do not store in direct sunlight or where temperatures exceed 100°F. Container should be closed when not in use. Keep out of the reach of children.
PACKAGING: 5 gallon pails, 55 gallon drums and 275 gallon tote tanks.
User friendly, complies with all V.O.C. emissions and E.P.A. standards.
|Weight per gallon, @ 77°F, ASTM D 1010||8.20 - 8.40|
|Nonvolatile %, ASTM D2939||19.00 ± 3.00|
|Viscosity @ 77°, ASTM D562 (Kreb’s Stormer Unit)||50 - 60|
|PH||4 to 6|
This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to the suitability of the contents. Nothing herein shall constitute a warranty, express or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent implied.12/8/05
|Default Title||45.0 lb|
Add item(s) to your cart, then calculate shipping cost below: