Our Sand Gator™ Mastic Asphalt Patch is for “alligatored” and distressed pavement repairs. It has a heavy duty thick but smooth paste like feel that dries like a rock. It contains mineral additives, glass fiber, ground rubber and plasticizers making this a great alternative to hot mix asphalt skin patching without the setup and equipment required for hot asphalt repairs. This economical alternative can be used for skin patching and large alligatored area repairs prolonging future and more extensive pavement replacement in isolated areas and improves aesthetics. This is used as an asphalt patch for thin layer repairs can be applied with a firm squeegee. This is not tamped or compacted into place it is a blacktop patch that is ideal for large distressed alligatored areas but pliable and shapable in more of a thick paste like material.
- Alli Gator Patch for distressed asphalt repairs
- Large areas can be covered
- Minimal shrinkage upon curing
- Can be applied in multiple layers for added thickness
- Shallow repairs smooth when applied then hard as a rock
- Buy pallet quantities of Sand Gator Mastic Asphalt Patch for big savings (half pallets available for savings as well, just select Qty 18 above)
SURFACE PREPARATION: Surface must be clean, dry and free of all dirt dust and debris.
APPLICATION: Mix material well prior to using as is. Pour Sand Gator on “Alligatored” pavement areas and work with a squeegee. “Over sand” or broadcast a fine sand* over the surface to aid in drying and to assist in bonding to the pavement.
COVERAGE: Up to 20 ft.2 for patching alligatoring areas and bird baths in ¼” depth. Up to 80 linear feet of ½” X ½” depth cracks.
CAUTION: KEEP FROM FREEZING. Do not use when rain is forecast, when surface is wet or when temperature is below 55°F. Wash tools in water. Use a paint thinner if material has dried. Do not store in direct sunlight or where temperatures exceed 100°F. Container should be closed when not in use. Keep out of the reach of children.
PACKAGING: 5 gallon pails and 55 gallon drums.
User friendly, complies with all V.O.C. emissions and E.P.A. standards.
|Weight per gallon, @ 77°F, ASTM D 1010||
10.40 - 10.80
|Nonvolatile %, ASTM D2939||
70.00 - 72.00
|Viscosity @ 77°, ASTM D562 (Kreb’s Stormer Unit)||
|Penetration (0.1 mm), ASTM D 5||
|Resistance to water, ASTM D2939||
No blistering, no re-emulsification
|Ductility, 77⁰F 5 cm/min. cm, ASTM D113||
This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to the suitability of the contents. Nothing herein shall constitute a warranty, express or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent implied.12/8/05
|5 Gal Pail Pricing Less Than Half Pallet||55.0 lb|
|Half Pallet - Qty 18 Pails||1000.0 lb|
Add item(s) to your cart, then calculate shipping cost below: