Skipdash™ Asphalt Line Paint is a fast dry modified latex emulsion of superior quality and toughness made for professional line stripers. It can be used on all pavement surfaces. Sprays smooth and dries faster. Use if for your next job. It can be used for parking lots, traffic islands, walkways, aisles, fire lanes, safety areas, roadways, handicap areas, tennis courts, and playgrounds.
- Good for all pavement marking projects
- Modified latex emulsion line paint
- Superior toughness
- Perfect for use with Titan PowrLiner 2850 Paint Striping Machine
Surface Preparation: Surface should be clean and free from dirt, dust, debris, and oil. Etching Concrete surfaces is advised prior to use. Do not stripe when pavement is wet or rain if forecast soon after. Skipdash Asphalt Line Marking Paint should be applied when temperatures are above 50 degrees.
Application: Mix well before use and if applied by spray it is best to strain the paint and you may also dilute slightly with water if needed. Brush or roll on as is. This paint formula will dry under normal conditions in about 30 minutes. If areas of painting are shaded or in cooler temperatures longer drying times may be required. Normal conditions may require 4 to 6 hours of drying time for no traffic pick-up.
Coverage: 400 to 500 linear feet of 4” stripe per gallon, 800 to 900 linear feet of 2” stripe per gallon, 250 to 300 linear feet of 6” stripe per gallon.
CAUTION: KEEP FROM FREEZING. Do not stripe when rain is in forecast, on wet surfaces, or when temperature is below 45°F. Wash tools in water. Use a suitable paint thinner if material has dried. Do not store in direct sunlight. Container should be closed when not in use. Because of alkali inherent in concrete surfaces there is no product guarantee on these. Keep out of the reach of children.
User friendly, complies with all V.O.C. emissions and E.P.A. standards.
MATERIAL SPECIFICATIONS: REQUIREMENTS:
Weight per gallon, ASTM D1010 (lbs) 13.30 – 14.00
Viscosity @ 77°F, ASTM D562 (Kreb’s Stormer Unit) for ambient application 75 – 80 KU
for heat application 85 – 100 KU
% Weight solids 74.00 ± 2.00
% Volume solids 58.00 ± 2.00
Dry Time (15 mil. – wet) @ 77°F & 50% R.H. Dry to no pick-up 10 – 15 min
VOC, grams/liter 150
Dry opacity, White & colors 0.92
Fineness of dispersion, Hegman 3.0
Directional reflectance of white paint, % 85
Bleeding ratio 0.95
Safety Data Sheets (SDS) -Click on links below to view PDF:
Product Info Sheet (INFO) - Click on the link below to view PDF:
|White Pavement Line Marking Paint - 275 Gal Tote||3913.0 lb|
|Yellow Pavement Line Marking Paint - 275 Gal Tote||8324.66 lb|
|Black Pavement Line Marking Paint - 275 Gal Tote||3821.0 lb|
|Red Pavement Line Marking Paint - 275 Gal Tote||3870.0 lb|
|Blue Pavement Line Marking Paint - 275 Gal Tote||3981.0 lb|
Add item(s) to your cart, then calculate shipping cost below: