The Elongated Turn Arrow Preformed Thermoplastic (12ft x 3ft) is to be used to indicate that a lane will become a turn lane at the approaching intersection. Effective communication to the motorist can improve roadway latency and general safety. Apply this symbol over a clean paved surface that has been heated by torch. Non-Reflective. For use leading up to intersections with a dedicated turn-only lane. Quantity of 2.
- Elongated Turn Arrow
- 12 ft x 3 ft
- Available as a "reversible" version WITHOUT the glass beads on either side (the Left and Right versions both have glass beads on their "up" side)
- Quantity of 2 per order
- Use of Thermoplastic Primer on asphalt and concrete surfaces can greatly assist with adhesion of material.
- ** NOTE** If applying to Concrete surfaces, Thermoplastic Epoxy is required to ensure proper adhesion!
- Recommendations for applying thermoplastic materials (PDF)
|90 MIL (WHITE) / Reversible (Elongated) - No Glass Beads||49.0 lb|
|90 MIL (WHITE) / Left Turn (Elongated)||49.0 lb|
|90 MIL (WHITE) / Right Turn (Elongated)||49.0 lb|
|125 MIL (WHITE) / Reversible (Elongated) - No Glass Beads||42.0 lb|
|125 MIL (WHITE) / Left Turn (Elongated)||42.0 lb|
|125 MIL (WHITE) / Right Turn (Elongated)||42.0 lb|
Add item(s) to your cart, then calculate shipping cost below: