1

Your cart is empty.

Product Image Spider Crack Economy Asphalt Crackfiller full skid-Crack & Joint Sealing-Sealcoating TX Whse-Sealcoating.com

Spider Crack Economy Asphalt Crackfiller full skid

SKU:

1493.28

Qty:


Spider Crack is our Economy grade pavement crack filler sold wholesale in skids is the exact item you need if you are selling to the pavement maintenance contractors.  This crackfiller was designed for smaller pavement cracks used for maintaining asphalt surfaces and is often preferred by the contractors performing minor repairs, residential or small commercial sealcoating or for any property maintenance work.  You will see these buyers using this crack sealant for their projects as the smaller contractors in the sealcoating business like this grade of crackfiller.  Although designed for smaller pavement cracks and applied most often prior to sealcoating this can be used for many pavement repair events prior to sealing or filling cracks.  If you contractor is prepared for pavement repairs then this is one of three cold type fillers that they will carry with them regularly.  If you are just beginning to offer pavement materials then this is one you will want to carry and may consider this in full skid of 1 gallons containers as well.  The one gallons can be sold and presented in your store in smaller areas or without much floor space but will fly off the shelf.

  • Wholesale economy cold crack filler by the skid
  • Pavement Maintenance contractors like this one
  • Pourable Single Component

COVERAGE PER GALLON:  Estimated to cover up to 80 linear feet of ½” X ½” depth cracks, but coverage is indefinite. 

CAUTION:  KEEP FROM FREEZING. Do not use if surface is wet, or it is suspected to rain. Do not store in hot temperatures or use product when temperature is below 50°F. Keep container out of the reach of children and closed when not in use

PACKAGING:  1 gallon jugs, 5 gallon pails and 55 gallon drums.

 MATERIAL SPECIFICATIONS: REQUIREMENTS:
Weight per gallon, @ 77°F, ASTM D1010 (lbs) 9.30 - 9.50
Viscosity @ 77°, ASTM D562 (Kreb’s Stormer Unit) 75 - 80
% Weight Solids 52.00 - 55.00
Drying time (minutes) ¼” x ¼” @ 77°f & 50% RH 60 min.
AASHTO M 140-70 meets spec.

 

Safety Data Sheet (SDS) - Click to View PDF in New Window | Click to Download PDF

ProductWeight
Default Title0.0 lb


Place item into cart to check shipping cost of this item:

Get shipping estimates